Application: Primarily intended for above or below ground installations of cold potable water systems for domestic, commercial and industrial applications, however, they are also suitable for the conveyance of other pressurised liquids which are chemically compatible with PVC, and for drain, waste and vent applications which are subjected to high compressive loading.
Standard: ASTM D1785 (sizes 1¼” – 12” also conform to ASTM D2665)
Certification: NSFpw
Available Sizes: ½” – 12”
Application: Primarily intended for above ground installations of cold potable water systems for domestic, commercial and industrial applications, however, they are also suitable for the conveyance of other pressurised liquids which are chemically compatible with PVC.
Standard: ASTM D2241
Certification: NSFpw
Available Sizes: 1” – 12”
Application: Underground cold potable water distribution systems.
Standard: BS EN ISO 1452
Certification: NSF/ANSI/CAN 61-G & NSF/ANSI 372
Available Sizes: 110mm – 315mm
Application: Underground cold potable water distribution systems.
Standard: ASTM D2241
Certification: NSFpw
Available Sizes: 2” – 12”
Application: Underground gravity sewer systems.
Standard: BS EN 1401
Available Sizes: 110mm – 315mm
Nominal ring stiffness: SN4/ SDR41
Application: Underground gravity sewer systems.
Standard: ASTM D3034
Available Sizes: 4” – 12”
Class: SDR35
Application: Primarily intended for above or below ground waste water systems to convey domestic effluent and surface water, however, they are also suitable for the discharge of other liquids which are compatible with PVC.
Standard: ASTM D2241 (dimensionally)
Available Sizes: 1½” – 6”
Application: Electrical PVC Conduit (EPC) is intended for above or below ground installations of electrical power and communication duct applications which are subjected to high compressive loading. These products are suitable for direct burial.
Standard: UL 651
Available Sizes: ½” – 6”
Application: Intended for above ground installations of electrical power and communication cable management systems.
Standard: BS EN 61386
Available Sizes: 20mm – 50mm
Application: Intended for above or below ground installations of hot and cold potable water systems for domestic, commercial and industrial applications, where temperatures do not exceed 82°C
Standard: ASTM D2846
Available Sizes: ½” – ¾”
Application: Intended for pressure-rated systems to convey water, industrial process liquids, effluents, slurries and municipal sewage, however, they are also suitable for the discharge of other liquids which are compatible with HDPE.
Standard: ASTM F-714, ASTM D-3035
Available Sizes: 4” – 24”
Application: Primarily intended for below ground waste water systems to convey domestic effluent and surface water, however, they are also suitable for the discharge of other liquids which are compatible with HDPE. Not for pressure applications.
Standard: ASTM F2648, ASTM F2306, AASHTO M252/M294
Available Sizes: 4” – 60”
